Redlands & Henry Bush Plumbing, Heating and Air Conditioning

Should I Repair or Replace My Water Heater?

It’s imperative that you have a water heater in your home that works as it should. Water heaters help you take a hot shower, wash dishes, and even do laundry. It heats water to the desired temperature and then provides you with hot water at the tap. If the water heater breaks, it can be quite inconvenient for you and your family. 

If your water heater is more than 10 years old, has not been serviced in the past 12 months, or has had a recent leak or flood event, it should be replaced. 

If you have any other issues with your water heater such as not heating water properly or leaking from anywhere other than the bottom of the tank, you should seek to hire a plumbing company that can repair it immediately.

Why Is My Water Heater Suddenly Breaking Down?

Water heaters are a common household appliance that people often take for granted. They are designed to last for a long time and can provide years of service before they need to be replaced. However, there are many factors that can cause them to break down unexpectedly.

A water heater typically will malfunction in one of two ways, lack of hot water or it will begin to leak. The lack of hot water can be caused by several factors; 1) Lack of maintenance and the build-up of sediment and calcium, 2) Faulty gas valve or thermostat, 3) Broken dip tube that brings cold water to the bottom of the tank. If you notice one of these signs, have your water heater inspected by a professional plumber as soon as possible before it causes severe damage to your home.

Common Signs It’s Time to Replace or Repair Water Heater

Water heaters are not made to last forever (on average 10 years). Eventually, they will need to be replaced or repaired. Below are some of the common signs that it is time for your water heater to be looked at by a professional:

  • Leaking water from the tank
  • Rust on the tank
  • Loud banging noises when trying to turn on the water
  • The pilot light goes out frequently and cannot be lit
  • The temperature of the water is too hot or cold

Your water heater displaying these signs means it’s time to schedule an appointment with a plumber who can diagnose and solve the problem. All water heater issues are solvable by getting a replacement or a simple repair. The plumber can help you decide on whether a replacement or repair is best for your water heater. 

Best Water Heater Repair and Replacement Services in California 

A water heater is one of the more expensive appliances in your home. This is why it is super important to make sure that you are getting the best services when it comes time for a replacement or repair. 

The best water heater services in California are Redlands & Henry Bush Plumbing and Air Conditioning. We have been providing the highest quality of services for over 120 years. We are also one of the most respected and established plumbing service providers. 

Specializing in plumbing repairs and installations, we offer a wide range of services from water heater replacement to faucet fixtures and drain repair. We use high-quality parts for their work and ensure that every repair or installation is done efficiently with a thorough clean-up afterward.

The team at Redlands & Henry Bush Plumbing and Air Conditioning stops at nothing to make sure all customers are satisfied. Our professionalism and prices are unmatched. 

Contact us now to get started! 

Feel free to schedule an appointment at your earliest convenience. We understand emergencies happen, which is why we are open 24/7. 

Need help paying for services you need? We have financing options available! 

How to Fix a Leaky Pipe

There are many reasons why pipes may leak. It is important to identify the cause of the leak before fixing it. For example, a pipe may be leaking due to an issue with its joints or because the pipe is old and needs to be replaced.

Fixing a leaky pipe can be done in many ways. If there is a crack in the pipe, you can use a sealant to fix it temporarily. You can also use glue or epoxy resin to fix leaks in pipes that are near joints and connections. Not comfortable with fixing things on your own? That’s what professional plumbers are there for. 

What Causes a Leaking Pipe?

Leakage is a very common issue that plagues the piping. As aforementioned, this is often caused by corrosion or the age of the piping. A leaking pipe can be categorized into two different types of leakage. 

The two types of leakage are:

  • Small Weeping Leakage

This is caused when there is a small leak in the pipe and it does not have any adverse effects on the pipe or on other components of the plumbing system. These types of leaks typically go unnoticed until one day they become a big leak.

  • Critical Leakage

This is when there are major leaks in pipes that lead to stoppages in the water supply and cause severe damage to property and other components of the plumbing system

Leaking pipes should be fixed as soon as the problem is noticed whether they are big or small. Leaving leaking pipes alone can lead to serious issues like toxic black mold, flooding, stained walls, and low-quality water. To prevent damage to your home or health, take care of leakage from any pipes immediately.

How To Fix A Leaky Pipe in 5 Super Easy Steps

It is possible to fix a leaky pipe on your own. All you need to do is follow the steps below and make sure you have the proper tools like a hacksaw and a replacement pipe or epoxy resin if you are just patching it up. 

Step 1: Check for Signs of Leakage on the Piping

The next step in checking for leakage is to determine if there is any water that seeps out from around the joints. If there is, then it’s likely that the pipe has started leaking and needs to be repaired.

Step 2: Turn Off the Water Supply

The first step is to turn off the water supply. This can be done by turning off the tap and unscrewing a hose or a pipe.

Step 3: Cut Out the Damaged Area of the Pipe

In this step, you will cut out the damaged area of the pipe. Use a hacksaw to carefully cut the damaged area of the pipe. 

Step 4: Replace or Patch the Damaged Area of the Pipe 

This step is the most important one in the process of repairing a pipe. If this step is not done correctly, it can lead to future damage to the pipe.

After cutting the damaged pipes, you need to replace it with either a new piece or patch it up with epoxy resin and steel mesh. 

Step 5: Turn On Water Supply and Test for Leaks

This is the last step in the fixing process. You will want to turn on the water supply and test for leaks. You’ll know you’ve done it right if there is no more leakage. 

If it’s still leaking after you’re done, retrace your steps and see if you might have missed a step. If you did all steps correctly, you may want to begin considering hiring a plumber to come help. 

What to Do If the Pipe Is Still Leaking 

If you can’t stop the leak, then you may want to call a plumber as soon as possible. The sooner the problem is addressed and fixed, the lower the cost of repairs will be. As well, hiring a plumber will prevent bigger problems with your home’s pipes and prevent the formation of hazardous black mold.

Here at Redlands & Henry Bush Plumbing and Air Conditioning, you get the best plumbing and HVAC company in California. We take care of all air conditioning, heating, plumbing, and commercial construction needs. 

Contact us today to schedule your appointment! It’ll be the best decision you’ve made all week. 

Want a quicker response? Call us at 909-570-2844.

What’s the Difference Between Plumbing and HVAC?

HVAC and plumbing aren’t things you think about until there is a problem. When you need repairs, it is best to count on an HVAC technician or plumbing specialist who will get the job done efficiently. 

If you aren’t sure about which type of services you need, keep reading to find out more about the difference between hiring a plumber vs an HVAC technician. 

What are the Differences between Plumbing and HVAC?

Plumbing and HVAC are two different fields, with different jobs and responsibilities. Plumbers work on pipes, drains, faucets, and water heaters to make sure that the water is flowing in the right direction. HVAC works on heating and cooling systems to keep a building at a comfortable temperature.

HVAC is responsible for keeping the temperature of a building at an optimal level for its inhabitants. They also need to make sure that the air is clean by filtering it or adjusting its humidity levels. Plumbers focus on making sure that there is water flow in a building by fixing leaks or plumbing problems.

What Are Common HVAC Issues?

HVAC issues are a common occurrence during months of extreme weather. It is important to know how to deal with these issues before they become a problem.

Some common HVAC issues that people may experience are:

  • A broken thermostat
  • A broken or disconnected air duct
  • Water coming leaking from the Air Conditioner or Furnace
  • An issue with the furnace or air conditioner not working

Dealing with any of these issues can be stress-inducing. However, it’s easy to solve these common issues by hiring an HVAC company. 

What Are Common Plumbing Issues?

Plumbing problems are not always easy to identify. The following is a list of common plumbing issues that are typically found in homes:

Clogged Drains

Drains can sometimes get clogged and need to be cleaned thoroughly. Common causes include hair, soap scum, grease, and roots. A plunger should clear it out for you, but a reliable plumber will have to come in if that does not work.


If you notice any leaks around your sink or toilet it could point to a problem with the nearby pipes. Pipes can be damaged from being loose, corroded, or broken.

Dripping Faucet or Running Toilet

Dripping faucets can waste up to 30 gallons of water per day. A toilet that continues to run can waste hundreds of gallons per day and can cause major septic problems if not fixed in a timely manner.

If you are having any of these issues, it’s time to hire a plumber to help you out. Plumbers have extensive training and knowledge to take care of various plumbing issues that can come up. 

How To Find A Good Plumbing and HVAC Company 

When it comes to plumbing, you want to make sure that you are getting the best service possible. You want to find a company that will be able to provide you with quality work and good customer service.

A good plumbing and HVAC company will be able to help you with any of your needs. They will be able to handle all your plumbing needs. From leaky faucets, clogged toilets, and water heaters, they can take care of it all. They can also help with any HVAC issues that you might have.

If you need a new furnace or air conditioner installed, they can do it for you as well. They will even have the proper licenses and certifications needed in order for them to do so safely and efficiently for your home or business. 

Here at Redlands and Henry Bush Plumbing and Air Conditioning, we’ll take care of any of your plumbing and HVAC needs. We are available 24/7 because we know you can never plan for emergencies. 

Schedule an appointment today or call us at 909-570-2844. No matter whether you need plumbing or HVAC services, the team at Redlands and Henry Bush Plumbing has got your back! Anytime, anywhere.