Redlands & Henry Bush Plumbing, Heating and Air Conditioning

How to Fix a Leaky Pipe

There are many reasons why pipes may leak. It is important to identify the cause of the leak before fixing it. For example, a pipe may be leaking due to an issue with its joints or because the pipe is old and needs to be replaced.

Fixing a leaky pipe can be done in many ways. If there is a crack in the pipe, you can use a sealant to fix it temporarily. You can also use glue or epoxy resin to fix leaks in pipes that are near joints and connections. Not comfortable with fixing things on your own? That’s what professional plumbers are there for. 

What Causes a Leaking Pipe?

Leakage is a very common issue that plagues the piping. As aforementioned, this is often caused by corrosion or the age of the piping. A leaking pipe can be categorized into two different types of leakage. 

The two types of leakage are:

  • Small Weeping Leakage

This is caused when there is a small leak in the pipe and it does not have any adverse effects on the pipe or on other components of the plumbing system. These types of leaks typically go unnoticed until one day they become a big leak.

  • Critical Leakage

This is when there are major leaks in pipes that lead to stoppages in the water supply and cause severe damage to property and other components of the plumbing system

Leaking pipes should be fixed as soon as the problem is noticed whether they are big or small. Leaving leaking pipes alone can lead to serious issues like toxic black mold, flooding, stained walls, and low-quality water. To prevent damage to your home or health, take care of leakage from any pipes immediately.

How To Fix A Leaky Pipe in 5 Super Easy Steps

It is possible to fix a leaky pipe on your own. All you need to do is follow the steps below and make sure you have the proper tools like a hacksaw and a replacement pipe or epoxy resin if you are just patching it up. 

Step 1: Check for Signs of Leakage on the Piping

The next step in checking for leakage is to determine if there is any water that seeps out from around the joints. If there is, then it’s likely that the pipe has started leaking and needs to be repaired.

Step 2: Turn Off the Water Supply

The first step is to turn off the water supply. This can be done by turning off the tap and unscrewing a hose or a pipe.

Step 3: Cut Out the Damaged Area of the Pipe

In this step, you will cut out the damaged area of the pipe. Use a hacksaw to carefully cut the damaged area of the pipe. 

Step 4: Replace or Patch the Damaged Area of the Pipe 

This step is the most important one in the process of repairing a pipe. If this step is not done correctly, it can lead to future damage to the pipe.

After cutting the damaged pipes, you need to replace it with either a new piece or patch it up with epoxy resin and steel mesh. 

Step 5: Turn On Water Supply and Test for Leaks

This is the last step in the fixing process. You will want to turn on the water supply and test for leaks. You’ll know you’ve done it right if there is no more leakage. 

If it’s still leaking after you’re done, retrace your steps and see if you might have missed a step. If you did all steps correctly, you may want to begin considering hiring a plumber to come help. 

What to Do If the Pipe Is Still Leaking 

If you can’t stop the leak, then you may want to call a plumber as soon as possible. The sooner the problem is addressed and fixed, the lower the cost of repairs will be. As well, hiring a plumber will prevent bigger problems with your home’s pipes and prevent the formation of hazardous black mold.

Here at Redlands & Henry Bush Plumbing and Air Conditioning, you get the best plumbing and HVAC company in California. We take care of all air conditioning, heating, plumbing, and commercial construction needs. 

Contact us today to schedule your appointment! It’ll be the best decision you’ve made all week. 

Want a quicker response? Call us at 909-570-2844.

You May Also Like

Leave a Reply