THE CARRIER® 360º WHOLE HOME ENERGY AUDIT

The Carrier 360° is a six-step process that includes a full range of services to determine and resolve issues related to your  home comfort level and energy use. The six steps include:

STEP 1. Inspection 

STEP 2. Tests 

STEP 3. Analysis 

STEP 4. Recommendation 

STEP 5. Resolution 

STEP 6. Results 

Following is a list of some of the tests and analyses  included in a Carrier360°.

Carrier 360° Components

> Health and Safety Check* (Inspect for smoke detector / CO monitors / Health hazards)

> Combustible Appliance Zone Check (Check CO levels in home)

> Gas Leakage Test (Check for combustible gas leaks)

> Energy Savings Assessment Check (Prioritize and recommend energy saving methods and repairs)

> Building Performance and Air Leakage Test: Blower Door Test (Evaluate and identify air tight the home is)

> Thermal Imaging Survey (Scan home with thermal imaging camera to identify hidden areas of concern i.e. missing insulation)

> Cost Benefit Analysis For Energy Control Measure (ECMs) (Approximate savings for energy savings)

> Duct System Leakage Test & Inspection† (In depth test/inspection of duct leakage to unconditioned areas)

> Indoor Air Quality and Ventilation Test Inspection*† (Inspect ventilation for fresh air requirements. Check filtration of current systems)

> Combustible Appliance and Zone Test† (Test the home and identify gas appliances for CO leak under “worst case” scenario)

To Set Up a CARRIER® 360º WHOLE HOME ENERGY AUDIT for your home HERE or Call 909-909-726-7046

* The detection and remediation of mold is exempt from any Carrier 360° analyses and recommendations. 

† Building analyst to determine if required based on current home conditions.

Be sure to contact Redlands Plumbing, Heating & Air Conditioning for all your service and accessory needs. We provide “Service Worth Bragging About” to the Inland Empire including; Redlands, Yucaipa, Loma Linda, Beaumont, Highland, Riverside, Banning, and Rancho Cucamonga.